FLOWTECH Electromagnetic flow meter operation principle is based on measuring electromotive force induced in electrically conductive liquid when it moves in magnetic field. The magnetic field is furnished in the flow sensor’s inner channel by a special electromagnetic system. Electromagnetic Flow Meter Price

What is Electromagnetic flow meter?

M930 Battery Operated Electromagnetic Flow Meter precisely measures stream of conductive fluids from 5 µS up. As there are no moving parts in the stream profile the stream meter can be applied to gauge very dirtied fluids containing even strong contamination. Assessment and readout unit (transmitter) shows both positive and negative stream just as aggregate and custom volume counters. Logged information can be appeared in plain view or downloaded by means of USB with Modbus convention. Ex930 sensor for use in conceivably hazardous airs in class II 3G EEx nA II T5/T6 is accessible in remote form of the stream meter.

Dialects: English, German, Czech

Model-explicit highlights

Setup information are sponsored up constantly and can be recouped when fundamental (battery substitution, control disappointment because of serious electrostatic release, and so on.). M930 can recognize void pipe and forestall checking invalid information.

Commonplace applications

Battery controlled M930 is intended for are the place solid power supply isn’t accessible. Run of the mill applications are water system, dewatering, building destinations, waterworks support or waste-water upkeep.

Battery Operated Electromagnetic Flow Meter

Inductive electromotive force (EMP) E is proportional to the mean flow velocity v, distance between the electrodes d (which is equal to the sensor’s inner diameter), and magnetic field strength ,
E = v ×d×B×k
Where k linear factor. B and d are constants for MFT of a given standard size.
The value of electromotive force (EMP) is independent of liquid temperature and viscosity, Considering the formula for inductive EMP, flow rate Q is calculated as follows:

Volume V of the liquid passed through the flow sensor during the time interval T is calculated by the formula.

Application for Electromagnetic Flow Meter Price :

• water abstraction;
• water treatment;
• water distribution network;
• custody transfer flow meters;
• irrigation;
• waste water treatment;
• filtration plants;
• industrial water applications;
• acids, alkalis, alkaline solutions, reagents;
• paper pulps;
• liquid foods.
• Heat meter for calculate energy of liquid.
• BTU meter.

Feature & Option

• Power supply : Battery operated/ 24V dc/230V AC
• Available in sizes from DN 10 to 300 mm (3/8” – 12”);
• High grade stainless steel, titanium, or tantalum measuring electrodes;
• Suitable for direct burial and constant flooding;
• Easy commissioning, automatic uploading of calibration values and settings
• High accuracy and stability of measurement;
• High resistance to external action;
• Connection type – wafer (DN 10, 15 mm), flanged (DN 20-1000 mm),
• threaded (DN 15; DN 32; DN 50; DN 80;);
• Full pipe detection;
• Bidirectional flow measurement;
• Suitable for mounting on polymer pipes;
• Graphic backlit LCD Display, Inbuilt and remote Display option
• Integrability into automatic industrial control systems;

Technical Data Sheet :

Design material:

• Flange : Carbon steel / Stainless steel Housing: Carbon steel / Stainless steel Lining : PTFE / Rubber
• Electrode: stainless steel, titanium, tantalum, etc.

Tech. Specification:

• Nominal diameter of the pipeline, DN : 10 TO 1000 mm Accuracy : 0.25% /0.5%
• Repeatability : 0.2
• Maximum pipeline pressure : 25 bar / 40 bar on request Minimum conductivity : 1 μS/cm
• Fluid temperature range : -10 to 100/150 °С Ambient temperature range : -25 to 70 °С Protection : IP-67/ EX
• Power supply : Battery operated
  : 24v dc
  : 230 v ac

Outputs:

• 4-20 mA analog output;
• Pulse outputs
• RS-485 interface
• HIGH & Low alarm output